FT312D
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This is the documentation page for the FT312D breakout board.
overview
The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.
External resources
pinout
The 12-pin connector is connected as follows:
5V | 3V3 |
USB ERROR#(jumpered) | TEST0 |
NC | NC |
TX_ACTIVE | CTS# |
RTS# | RXD |
TXD | GND |
LEDS
- The only LED is a power LED
Jumper settings
- The left two jumpers should be placed, the third (right) jumper should NOT be placed.
future hardware enhancements
Changelog
1.1
- Initial public release