Difference between revisions of "Assembling the DMX case"
Jump to navigation
Jump to search
(Created page with "= Assembling the DMX case = 600px|DMX case == Included == Included screws and washers/spacers 10x m3x6 4x m3x12 4x m2.5x10 4x m3x4mm spacer ...") |
(→Step 1) |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
= Assembling the DMX case = |
= Assembling the DMX case = |
||
[[File: |
[[File:DMX_case_complete.jpg|600px|DMX case]] |
||
== Included == |
== Included == |
||
Included screws and |
Included screws and spacers |
||
7x M3X6 6+1 screw |
|||
4x M2.5x10 screw |
|||
4X M2.5X12MM (If we're our of 12mm, we'll send 16mm) |
|||
M2.5x4MM spacer |
|||
4X M2.5X20MM FF spacer |
|||
4X M2.5X6MM screw |
|||
=== OLD: === |
|||
We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was |
|||
intended by the RPI people. |
|||
10x m3x6 |
10x m3x6 |
||
4x m3x12 |
|||
4x m2.5x10 |
|||
4x m3x4mm spacer |
|||
4x m3x20mm spacer |
|||
12x m3 plastic washer |
|||
== Step 1 == |
== Step 1 == |
||
4x |
4x m2.5x6 |
||
4x |
4x m2.5x12 |
||
4x |
4x m2.5x4mm spacer |
||
4x |
4x m2.5x20mm spacer |
||
12x m3 plastic washer |
|||
[[File:DMX_case_1.jpg|400px|DMX case - step 1]] |
[[File:DMX_case_1.jpg|400px|DMX case - step 1]] |
||
[[File:DMX_case_2.jpg|400px|DMX case - step 1]] |
|||
[[File:DMX_case_3.jpg|400px|DMX case - step 1]] |
[[File:DMX_case_3.jpg|400px|DMX case - step 1]] |
||
| Line 29: | Line 40: | ||
[[File:DMX_case_5.jpg|400px|DMX case - step 2]] |
[[File:DMX_case_5.jpg|400px|DMX case - step 2]] |
||
[[File:DMX_case_6.jpg|400px|DMX case - step 2]] |
|||
[[File:DMX_case_7.jpg|400px|DMX case - step 2]] |
|||
== Step 3 == |
== Step 3 == |
||
| Line 35: | Line 50: | ||
4x m2.5x10 |
4x m2.5x10 |
||
[[File: |
[[File:DMX_case_8.jpg|400px|DMX case - step 3]] |
||
[[File: |
[[File:DMX_case_9.jpg|400px|DMX case - step 3]] |
||
[[File: |
[[File:DMX_case_10.jpg|400px|DMX case - step 3]] |
||
[[File:DMX_case_11.jpg|400px|DMX case - step 3]] |
|||
[[File:DMX_case_12.jpg|400px|DMX case - step 3]] |
|||
[[File:DMX_case_13.jpg|400px|DMX case - step 3]] |
|||
Latest revision as of 17:02, 31 December 2023
Assembling the DMX case
Included
Included screws and spacers
7x M3X6 6+1 screw 4x M2.5x10 screw 4X M2.5X12MM (If we're our of 12mm, we'll send 16mm) M2.5x4MM spacer 4X M2.5X20MM FF spacer 4X M2.5X6MM screw
OLD:
We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was intended by the RPI people.
10x m3x6 4x m3x12 4x m2.5x10 4x m3x4mm spacer 4x m3x20mm spacer
Step 1
4x m2.5x6 4x m2.5x12 4x m2.5x4mm spacer 4x m2.5x20mm spacer
Step 2
Step 3
6x m3x6 4x m2.5x10
