Bridgeclock

From BitWizard WIKI
Revision as of 19:27, 14 July 2014 by Rew (talk | contribs) (Created page with "= bridgeclock = == features == * Different sounds for "end-of-round", "Warning, end-of-round is nearing" and "Start the round". * Easy-to-use user interface for adjustments...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

bridgeclock

features

  • Different sounds for "end-of-round", "Warning, end-of-round is nearing" and "Start the round".
  • Easy-to-use user interface for adjustments.
  • Big display.
  • Preset programs. Allow you to quickly change between different settings (e.g. for the beginners-evening where the rounds are slightly longer).
  • Visible difference between "time left to change" and "time remaining in round".

normal use

The bridgeclock is simple to use. Just plug it in and when it is time start the clock, push the start/stop button.

If during play some event causes the current round to require an extension, you can hit plus to increase the current time by one minute. If you want the first round to be longer than the rest (e.g. to allow people to get settled or to allow them to deal the cards) you can also do that before starting the clock for the first round.

Similarly, if e.g. you find everybody is ready for the next round, you can decrease the time by one minute by pressing minus.

You can also stop (and then restart) the clock by pressing start/stop.

A warning sounds (by default 5 minutes) before the end of each round.

A different warning sounds at the end of the round.

The clock will then animate the first digit to indicate that it is time to change tables. This allows users to see the difference between "2 minutes left to change" and "2 minutes left in this round".

A third sound is produced when the next round starts.

Adjusting the clock

To adjust the clock press "prog". Now + and - will select the preset-program. Press "start/stop" to start this program, or pres "prog" again to make adjustments to this program.

For each program there are three settings: time to play, warning time, and changeover time. Each is adjusted with the + and - keys. The changeover time is adjusted with 20 second intervals. The other two with 1 minute intervals.

Pressing "prog" will move to the next option. The changes are automatically saved for the next time.

Unused programs start out at the defaults of 30 minutes playing, 5 minute warning and 3 minute changeover time.