FT220X
Revision as of 13:23, 2 November 2015 by Cartridge1987 (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This is the documentation page for the FT220X breakout board. That can be bought in the BitWizard shop.
overview
The FT220X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT220X chip.
External resources
pinout
The 12-pin connector is connected as follows:
5V | 3V3 |
MIOSI2 | MIOSI3 |
MIOSI0 | MIOSI1 |
CBUS3 | MISO |
CS# | CLK |
GND | GND |
Please note: On version 1.1 of the boards, the silkscreen markings for MIOSI1 and MIOSI3 are switched!
LEDS
- The only LED is a power LED
Jumper settings
No jumpers this time :)
future hardware enhancements
Changelog
1.1
- Initial public release