FT230X
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This is the documentation page for the FT230X breakout board.
overview
The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.
External resources
pinout
The 12-pin connector is connected as follows:
| 5V | 3V3 |
| RTS# | RXD |
| TXD | CTS# |
| CBUS3 | CBUS2 |
| CBUS1 | CBUS0 |
| GND | GND |
LEDS
- The board is equipped with a power-LED, an Rx-LED and a Tx-LED
Jumper settings
No jumpers this time :)
future hardware enhancements
Changelog
1.1
- Initial public release