Difference between revisions of "Raspberry Juice"

From BitWizard WIKI
Jump to: navigation, search
(Use)
Line 10: Line 10:
 
= Use =  
 
= Use =  
 
The Raspberry Juice can be found using I2C or SPI at address 0xA4, and has the following read ports:
 
The Raspberry Juice can be found using I2C or SPI at address 0xA4, and has the following read ports:
 +
All times are in ms, and are 32 bits in size.
 
{| border=1
 
{| border=1
 
! Port !! Returned value (in milliseconds)
 
! Port !! Returned value (in milliseconds)
Line 16: Line 17:
 
|-
 
|-
 
| 0x21 || Time until power on
 
| 0x21 || Time until power on
 +
 
<!--
 
<!--
 
|-
 
|-
| 0x30 || Absolute scheduled time of power off
+
| 0x28 || Absolute scheduled time of power off
 
|-
 
|-
| 0x31 || Absolute scheduled time of power on  
+
| 0x29 || Absolute scheduled time of power on  
 
-->
 
-->
 +
|-
 +
| 0x30 || button active || 0: don't react to button press. 1: react to button press (default),  others: undefined.
 +
|-
 +
| 0x31 || external input active || 0: inactive (default), 1: active, others: undefined.
 +
|-
 +
| 0x32 || external input polarity || 0: active low (default), 1: active high, others: undefined.
 +
|-
 +
| 0x33 || power set on/off state || 0: off, 1: on, others: undefined.
 +
 +
|-
 +
| 0x38 || button active powerupstate || 0: don't react to button press. 1: react to button press (default),  others: undefined.
 +
|-
 +
| 0x39 || external input active powerupstate || 0: inactive (default), 1: active, others: undefined.
 +
|-
 +
| 0x3a || external input polarity powerupstate || 0: active low (default), 1: active high, others: undefined.
 +
|-
 +
| 0x3b || power set on/off state powerupstate || 0: off, 1: on, others: undefined.
 
|}
 
|}
  
Line 31: Line 50:
 
|-
 
|-
 
| 0x21 || Set the time in milliseconds until power on
 
| 0x21 || Set the time in milliseconds until power on
 +
|-
 +
 +
 +
| 0x30 || button active || 0: don't react to button press. 1: react to button press (default),  others: undefined.
 +
|-
 +
| 0x31 || external input active || 0: inactive (default), 1: active, others: undefined.
 +
|-
 +
| 0x32 || external input polarity || 0: active low (default), 1: active high, others: undefined.
 +
|-
 +
| 0x33 || power set on/off state || 0: off, 1: on, others: undefined.
 +
 +
|-
 +
| 0x38 || button active powerupstate || 0: don't react to button press. 1: react to button press (default),  others: undefined.
 +
|-
 +
| 0x39 || external input active powerupstate || 0: inactive (default), 1: active, others: undefined.
 +
|-
 +
| 0x3a || external input polarity powerupstate || 0: active low (default), 1: active high, others: undefined.
 +
|-
 +
| 0x3b || power set on/off state powerupstate || 0: off, 1: on, others: undefined.
 
|}
 
|}
  
 
So, for instance, writing 10000 to port 0x21 and 1000 to 0x20 will cut the power in 1 second, and then turn on the power 9 seconds later.
 
So, for instance, writing 10000 to port 0x21 and 1000 to 0x20 will cut the power in 1 second, and then turn on the power 9 seconds later.

Revision as of 14:33, 31 July 2014

The Raspberry Juice board


Overview

The Raspberry Juice serves as a power switch for the Raspberry Pi. This expansion board can turn the power on or off at a scheduled time.

Specifications

The Juice always uses about 2mA/10mW. The board is rated for a maximum current of 1A.

Use

The Raspberry Juice can be found using I2C or SPI at address 0xA4, and has the following read ports: All times are in ms, and are 32 bits in size.

Port Returned value (in milliseconds)
0x20 Time until power off
0x21 Time until power on
0x30 button active 0: don't react to button press. 1: react to button press (default), others: undefined.
0x31 external input active 0: inactive (default), 1: active, others: undefined.
0x32 external input polarity 0: active low (default), 1: active high, others: undefined.
0x33 power set on/off state 0: off, 1: on, others: undefined.
0x38 button active powerupstate 0: don't react to button press. 1: react to button press (default), others: undefined.
0x39 external input active powerupstate 0: inactive (default), 1: active, others: undefined.
0x3a external input polarity powerupstate 0: active low (default), 1: active high, others: undefined.
0x3b power set on/off state powerupstate 0: off, 1: on, others: undefined.

Additionally, the following can be written to the Juice:

Port Effect
0x20 Set the time in milliseconds until power off
0x21 Set the time in milliseconds until power on
0x30 button active 0: don't react to button press. 1: react to button press (default), others: undefined.
0x31 external input active 0: inactive (default), 1: active, others: undefined.
0x32 external input polarity 0: active low (default), 1: active high, others: undefined.
0x33 power set on/off state 0: off, 1: on, others: undefined.
0x38 button active powerupstate 0: don't react to button press. 1: react to button press (default), others: undefined.
0x39 external input active powerupstate 0: inactive (default), 1: active, others: undefined.
0x3a external input polarity powerupstate 0: active low (default), 1: active high, others: undefined.
0x3b power set on/off state powerupstate 0: off, 1: on, others: undefined.

So, for instance, writing 10000 to port 0x21 and 1000 to 0x20 will cut the power in 1 second, and then turn on the power 9 seconds later.