File:3DPrintedWheel.jpg

From BitWizard WIKI
Jump to: navigation, search
Original file ‎(928 × 696 pixels, file size: 52 KB, MIME type: image/jpeg)

The 3D printed wheel that was made for the 28BYJ-48 Stepper Motor. Read how it is made in blog 17

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:40, 17 November 2015Thumbnail for version as of 13:40, 17 November 2015928 × 696 (52 KB)Cartridge1987 (talk | contribs)The 3D printed wheel that was made for the 28BYJ-48 Stepper Motor. Read how it is made in blog 17
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer SONY
Camera model CYBERSHOT
Exposure time 1/30 sec (0.033333333333333)
F Number f/2.8
ISO speed rating 100
Date and time of data generation 14:43, 17 November 2015
Lens focal length 7.1 mm
Orientation Normal
Horizontal resolution 72 dpi
Vertical resolution 72 dpi
File change date and time 14:43, 17 November 2015
Y and C positioning Co-sited
Exposure Program Normal program
Exif version 2.1
Date and time of digitizing 14:43, 17 November 2015
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode 2
APEX exposure bias 0
Maximum land aperture 3 APEX (f/2.83)
Metering mode Center weighted average
Light source Unknown
Flash Flash did not fire
Supported Flashpix version 0,100
Color space sRGB
File source Digital still camera
Scene type A directly photographed image
Retrieved from "https://bitwizard.nl/wiki/index.php?title=File:3DPrintedWheel.jpg&oldid=3602"