https://bitwizard.nl/wiki/api.php?action=feedcontributions&user=Arnold&feedformat=atom
BitWizard WIKI - User contributions [en]
2024-03-28T08:43:31Z
User contributions
MediaWiki 1.27.0
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2549
16 LEDs
2013-04-25T07:51:54Z
<p>Arnold: /* Jumper settings */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br><br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br><br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED0 || LED1<br />
|- <br />
| 5 || 6 || LED2 || LED3<br />
|-<br />
| 7 || 8 || LED4 || LED5<br />
|-<br />
| 9 || 10 || LED6 || LED7<br />
|-<br />
| 11 || 12 || LED8 || LED9<br />
|-<br />
| 13 || 14 || LED10 || LED11<br />
|-<br />
| 15 || 16 || LED12 || LED13<br />
|-<br />
| 17 || 18 || LED14 || LED15<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
== Jumper settings ==<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND / kathode</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC / anode</td></tr><br />
</table><br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2548
16 LEDs
2013-04-24T16:03:40Z
<p>Arnold: /* Pinout */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br><br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br><br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED0 || LED1<br />
|- <br />
| 5 || 6 || LED2 || LED3<br />
|-<br />
| 7 || 8 || LED4 || LED5<br />
|-<br />
| 9 || 10 || LED6 || LED7<br />
|-<br />
| 11 || 12 || LED8 || LED9<br />
|-<br />
| 13 || 14 || LED10 || LED11<br />
|-<br />
| 15 || 16 || LED12 || LED13<br />
|-<br />
| 17 || 18 || LED14 || LED15<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
== Jumper settings ==<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2547
16 LEDs
2013-04-24T16:03:16Z
<p>Arnold: /* Jumper settings */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br><br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br><br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED0 || LED1<br />
|- <br />
| 5 || 6 || LED2 || LED3<br />
|-<br />
| 7 || 8 || LED4 || LED5<br />
|-<br />
| 9 || 10 || LED6 || LED7<br />
|-<br />
| 11 || 12 || LED8 || LED9<br />
|-<br />
| 13 || 14 || LED10 || LED11<br />
|-<br />
| 15 || 16 || LED12 || LED13<br />
|-<br />
| 17 || 18 || LED14 || LED15<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2546
16 LEDs
2013-04-24T16:02:45Z
<p>Arnold: /* Pinout */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br><br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br><br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED0 || LED1<br />
|- <br />
| 5 || 6 || LED2 || LED3<br />
|-<br />
| 7 || 8 || LED4 || LED5<br />
|-<br />
| 9 || 10 || LED6 || LED7<br />
|-<br />
| 11 || 12 || LED8 || LED9<br />
|-<br />
| 13 || 14 || LED10 || LED11<br />
|-<br />
| 15 || 16 || LED12 || LED13<br />
|-<br />
| 17 || 18 || LED14 || LED15<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2545
16 LEDs
2013-04-24T16:00:25Z
<p>Arnold: /* Overview */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br><br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br><br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2544
16 LEDs
2013-04-24T15:47:16Z
<p>Arnold: /* Possible Configurations */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br><br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2543
16 LEDs
2013-04-24T15:46:23Z
<p>Arnold: /* Related projects */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
== Pinout ==<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2542
16 LEDs
2013-04-24T15:45:16Z
<p>Arnold: /* Possible Configurations */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the GND and power pins on the boards.<br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2541
16 LEDs
2013-04-24T15:44:48Z
<p>Arnold: /* Possible Configurations */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
To test the 16LED, connect the device to any of the power pins on the boards.<br />
For example if you have a combination of the DIO and the 16LED (common GND), connect DIO-PIN1 to 16LED-PIN1 and DIO-PIN2 to 16LED-<b>PIN3</b> to light LED0 as DIO-PIN2 is VCC (5V).<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2540
16 LEDs
2013-04-24T15:37:22Z
<p>Arnold: /* Overview */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
A very useful board to test your digital outputs. Works on 5V as well as 3.3V so for the DIO as well as the Pi GPIO pins.<br />
Must have! Use the 10x1Pin F-F kabel to hook it up to the boards.<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2539
16 LEDs
2013-04-24T15:34:08Z
<p>Arnold: /* Assembly instructions */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
<br />
<br />
== Assembly instructions ==<br />
No user adjustable settings.<br />
<br />
=== Possible Configurations ===<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold
https://bitwizard.nl/wiki/index.php?title=16_LEDs&diff=2538
16 LEDs
2013-04-24T15:32:30Z
<p>Arnold: /* Pinout */</p>
<hr />
<div>[[File:16-LEDs.jpg|thumb|300px|alt=The 16_LEDs PCB|The 16_LEDs PCB]]<br />
<br />
This is the documentation page for the 16-LEDs board. <br />
<br />
== Overview ==<br />
<br />
<br />
== Assembly instructions ==<br />
<br />
<br />
=== Possible Configurations ===<br />
<br />
<br />
== External resources ==<br />
<br />
<br />
=== Related projects ===<br />
<br />
<br />
{| border=1 cellpadding="5"<br />
! colspan="2" | pin || ! colspan="2" | function<br />
|-<br />
| 1 || 2 || GND || GND<br />
|-<br />
| 3 || 4 || LED1 || LED2<br />
|- <br />
| 5 || 6 || LED3 || LED4<br />
|-<br />
| 7 || 8 || LED5 || LED6<br />
|-<br />
| 9 || 10 || LED7 || LED8<br />
|-<br />
| 11 || 12 || LED9 || LED10<br />
|-<br />
| 13 || 14 || LED11 || LED12<br />
|-<br />
| 15 || 16 || LED13 || LED14<br />
|-<br />
| 17 || 18 || LED15 || LED16<br />
|-<br />
| 19 || 20 || VCC || VCC<br />
|}<br />
<br />
<b>Common Ground/Common VCC</b> is hard wired in JP1.<br />
<table><br />
<tr><td> 1=2&nbsp;&nbsp;3</td><td>Common GND</td></tr><br />
<tr><td> 1&nbsp;&nbsp;2=3 </td><td>Common VCC</td></tr><br />
</table><br />
<br />
== Jumper settings ==<br />
<br />
<br />
== Future hardware enhancements ==<br />
<br />
<br />
== Changelog ==<br />
<br />
<br />
=== 2.0 ===<br />
* Initial public release</div>
Arnold