Difference between revisions of "Temperature sensor example"
Jump to navigation
Jump to search
(Created page with " == initialization == #!/bin/sh bw_tool -a 94 -w 70:c7 # internal tempsens with internal 1.1V as reference bw_tool -a 94 -w 71:c6 # external tempsens with internal 1.1V as...") |
|||
| Line 1: | Line 1: | ||
== initialization == |
== initialization == |
||
The following is a script that I use to initialize the temperature sensors for the rpi_ui board. |
|||
#!/bin/sh |
#!/bin/sh |
||
| Line 8: | Line 11: | ||
bw_tool -a 94 -w 82:6 |
bw_tool -a 94 -w 82:6 |
||
bw_tool -a 94 -w 80:2 |
bw_tool -a 94 -w 80:2 |
||
== readout == |
== readout == |
||
Revision as of 16:17, 3 December 2012
initialization
The following is a script that I use to initialize the temperature sensors for the rpi_ui board.
#!/bin/sh bw_tool -a 94 -w 70:c7 # internal tempsens with internal 1.1V as reference bw_tool -a 94 -w 71:c6 # external tempsens with internal 1.1V as reference bw_tool -a 94 -W 81:1000 bw_tool -a 94 -w 82:6 bw_tool -a 94 -w 80:2
readout
#!/bin/sh # # # Set the number of samples to 64, and shift by 0, or set the # number of samples to 4096 and shift by 6. The latter is recommended! # adcmaxval=65520 #adcmaxval=1023 # # MCP9700 degrees per volt. vperdeg=0.010 #refvoltage=4.9000 refvoltage=1.1000 # mcp offset voltage is 500mv at 0 deg. At 0.010 volt per deg that comes to # 50 degrees C. offset=50 # # # 60 adc channel 0, direct value (0-1023) # 68 adc channel 0, averaged value (0-65520 with nsamp=4096, shift=6) # 61 adc channel 1, direct value (0-1023) # 69 adc channel 1, averaged value (0-65520 with nsamp=4096, shift=6) register_to_read=69 # # settings are done, now the preparations. convfactor=`(echo scale = 10 ; echo obase=16;echo $refvoltage / $vperdeg / $adcmaxval ) | bc` offsethex=`(echo obase=16; echo scale=3;echo $offset) | bc ` # now do the real deal. rawtemp=`sudo bw_tool -s 100000 -a 94 -R $register_to_read:s | tr a-z A-Z` (echo ibase=16; echo scale=3;echo $rawtemp \* $convfactor - $offsethex) | bc