Difference between revisions of "FT201X"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 2: | Line 2: | ||
This is the documentation page for the FT201X breakout board. |
This is the documentation page for the FT201X breakout board. |
||
The FT201X breakout board can be bought |
The FT201X breakout board can be bought in the [http://www.bitwizard.nl/shop/breakout-boards/ft201x-breakout-board BitWizard shop]. |
||
== |
== Overview == |
||
The FT201X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT201X chip. |
The FT201X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT201X chip. |
||
| Line 13: | Line 13: | ||
* [http://www.ftdichip.com/Products/ICs/FT201X.html FTDI product page] |
* [http://www.ftdichip.com/Products/ICs/FT201X.html FTDI product page] |
||
== |
== Pinout == |
||
The 12-pin connector is connected as follows: |
The 12-pin connector is connected as follows: |
||
| Line 34: | Line 34: | ||
No jumpers this time :) |
No jumpers this time :) |
||
== |
== Future hardware enhancements == |
||
Latest revision as of 16:47, 6 November 2015
This is the documentation page for the FT201X breakout board. The FT201X breakout board can be bought in the BitWizard shop.
Overview
The FT201X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT201X chip.
External resources
Pinout
The 12-pin connector is connected as follows:
| 5V | 3V3 |
| SCL | SDA |
| CBUS5 | CBUS4 |
| CBUS3 | CBUS2 |
| CBUS1 | CBUS0 |
| GND | GND |
LEDS
- The only LED is a power LED
Jumper settings
No jumpers this time :)
Future hardware enhancements
Changelog
1.1
- Initial public release