Difference between revisions of "FT245RL breakout board"
Jump to navigation
Jump to search
(Created page with '= FT245RL breakout board = This is the documentation page for the FT245RL breakout board. == overview == The FT245RL breakout board has an USB connector and a 20-pin IO conne…') |
(No difference)
|
Revision as of 15:44, 28 September 2011
FT245RL breakout board
This is the documentation page for the FT245RL breakout board.
overview
The FT245RL breakout board has an USB connector and a 20-pin IO connector. The brains of the PCB, of course, is an FT245RL chip.
pinout
The 20 pin connector is connected as follows
| 1 | GND |
| 2 | GND |
| 3 | D1 |
| 4 | D5 |
| 5 | D2 |
| 6 | D7 |
| 7 | D0 |
| 8 | D4 |
| 9 | D3 |
| 10 | D6 |
| 11 | WR |
| 12 | RD# |
| 13 | RXF |
| 14 | TXE# |
| 15 | NC |
| 16 | NC |
| 17 | NC |
| 18 | NC |
| 19 | VCC |
| 20 | VCC |
- led1 (near the bottom) is connected to VCC
Jumper settings
IO and supply voltage to 20-pin connector
1-2: 3V3
2-3: 5V