Difference between revisions of "FT312D"
Jump to navigation
Jump to search
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:FT312D.jpg|thumb|300px]] |
[[File:FT312D.jpg|thumb|300px]] |
||
This is the documentation page for the FT312D breakout board. |
This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function). <br> The FT312D breakout board can you buy in the [http://www.bitwizard.nl/shop/breakout-boards/ft312d-breakout-board BitWizard shop]. |
||
== |
== Overview == |
||
The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip. |
The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip. |
||
| Line 12: | Line 12: | ||
* [http://www.ftdichip.com/Products/ICs/FT312D.html FTDI product page] |
* [http://www.ftdichip.com/Products/ICs/FT312D.html FTDI product page] |
||
== |
== Using the board == |
||
The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone. |
The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone. |
||
| Line 18: | Line 18: | ||
This board is compatible with AOA (Android Open Accessory), and for example the PodMode app. |
This board is compatible with AOA (Android Open Accessory), and for example the PodMode app. |
||
== |
== Pinout == |
||
The 12-pin connector is connected as follows: |
The 12-pin connector is connected as follows: |
||
| Line 39: | Line 39: | ||
* The left two jumpers should be placed, the third (right) jumper should NOT be placed. |
* The left two jumpers should be placed, the third (right) jumper should NOT be placed. |
||
== |
== Future hardware enhancements == |
||
* jumper to be able to disconnect the 5V header pin from the 5V USB pin |
* jumper to be able to disconnect the 5V header pin from the 5V USB pin |
||
Latest revision as of 16:51, 6 November 2015
This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function).
The FT312D breakout board can you buy in the BitWizard shop.
Overview
The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.
External resources
Using the board
The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone.
This board is compatible with AOA (Android Open Accessory), and for example the PodMode app.
Pinout
The 12-pin connector is connected as follows:
| 5V | 3V3 |
| USB ERROR#(jumpered) | TEST0 |
| NC | NC |
| TX_ACTIVE | CTS# |
| RTS# | RXD |
| TXD | GND |
LEDS
- The only LED is a power LED
Jumper settings
- The left two jumpers should be placed, the third (right) jumper should NOT be placed.
Future hardware enhancements
- jumper to be able to disconnect the 5V header pin from the 5V USB pin
Changelog
1.1
- Initial public release