Difference between revisions of "Iphone 3GS camera"
Jump to navigation
Jump to search
(→intro) |
(→pinout) |
||
| Line 3: | Line 3: | ||
I bought an Iphone 3GS camera module as it is cheap, and I expected to be able to interface it with something, probably an FPGA. |
I bought an Iphone 3GS camera module as it is cheap, and I expected to be able to interface it with something, probably an FPGA. |
||
== |
== Pinout == |
||
Getting the pinout is not easy. |
Getting the pinout is not easy. |
||
Latest revision as of 12:05, 11 November 2015
Intro
I bought an Iphone 3GS camera module as it is cheap, and I expected to be able to interface it with something, probably an FPGA.
Pinout
Getting the pinout is not easy.
The connector has a central part with 12 pins on each side and a further 4 pins on the corners. Those four pins on the corners are numbered 25 through 28. The other pins are numbered 1,3,5,...-23 on one side and 2,4,6,...-24 on the other side.
So far I've managed to find:
| 1,2,7,8,10 | GND |
| 3,4,5,6 | NC |
| 9,11 | DATAP0, DATAN0 |
| 13,16,17 | GND |
| 12 | VCC 3.0V |
| 14 | RESETN |
| 15 | VCC 1.8V ? |
| 18 | CLK |
| 19,21 | PCLKP, PCLKN |
| 20 | SCL |
| 22 | SDA |
| 23,24 | GND |
| 25,26,27,28 | GND |
This makes me think: The pixel data is transferred serially. Configuration data is transferred using I2C.