Latest revision as of 16:02, 31 December 2023

Assembling the DMX case

Included screws and spacers

7x M3X6 6+1 screw
4x M2.5x10 screw
4X M2.5X12MM (If we're our of 12mm, we'll send 16mm) 
M2.5x4MM spacer 
4X M2.5X20MM FF spacer 
4X M2.5X6MM  screw

We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was intended by the RPI people.

10x m3x6
 4x m3x12
 4x m2.5x10
 4x m3x4mm spacer
 4x m3x20mm spacer

4x m2.5x6
4x m2.5x12
4x m2.5x4mm spacer
4x m2.5x20mm spacer

6x m3x6
4x m2.5x10

@@ Line 4: / Line 4: @@
 == Included ==
+Included screws and spacers
 x M3X6 6+1 screw
 x M2.5x10 screw
@@ Line 12: / Line 14: @@
 === OLD: ===
+We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was
-Included screws and spacers
+intended by the RPI people.
 x m3x6
 x m3x12
@@ Line 21: / Line 24: @@
 == Step 1 ==
-x m3x6
+x m2.5x6
-x m3x12
+x m2.5x12
-x m3x4mm spacer
+x m2.5x4mm spacer
-x m3x20mm spacer
+x m2.5x20mm spacer
 [[File:DMX_case_1.jpg‎|400px|DMX case - step 1]]