Difference between revisions of "FT312D"

Revision as of 12:29, 2 November 2015

This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function).
The FT312D breakoutboard you can buy in the BitWizard shop.

overview

The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.

External resources

using the board

The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone.

This board is compatible with AOA (Android Open Accessory), and for example the PodMode app.

pinout

The 12-pin connector is connected as follows:

5V	3V3
USB ERROR#(jumpered)	TEST0
NC	NC
TX_ACTIVE	CTS#
RTS#	RXD
TXD	GND

LEDS

The only LED is a power LED

Jumper settings

The left two jumpers should be placed, the third (right) jumper should NOT be placed.

future hardware enhancements

jumper to be able to disconnect the 5V header pin from the 5V USB pin

Changelog

1.1

Initial public release

@@ Line 1: / Line 1: @@
 [[File:FT312D.jpg|thumb|300px]]
-This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function).
+This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function). <br> The FT312D breakoutboard you can buy in the [http://www.bitwizard.nl/shop/breakout-boards/ft312d-breakout-board BitWizard shop].
 == overview ==