Difference between revisions of "Raspberry Pi camera extension kit"
| Line 1: | Line 1: | ||
= Connecting everything = |
= Connecting everything = |
||
== Shipped after 20-07-2013 == |
|||
You can recognise this version by the way the connectors one the "camera board" convertor are mounted on opposite sides of the PCB.<br> |
|||
<br> |
|||
This is very straightforward:<br> |
|||
- Turn off your Raspberry Pi<br> |
|||
- Connect the opposite-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"<br> |
|||
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"<br> |
|||
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards<br> |
|||
<br> |
|||
And you're done! |
|||
== Shipped BEFORE 20-07-2013 == |
|||
You can recognise this version by the way the connectors one the "camera board" convertor are mounted on the same side of the PCB.<br> |
|||
<br> |
|||
This is very straightforward:<br> |
This is very straightforward:<br> |
||
- Turn off your Raspberry Pi<br> |
- Turn off your Raspberry Pi<br> |
||
Revision as of 15:23, 19 July 2013
Connecting everything
Shipped after 20-07-2013
You can recognise this version by the way the connectors one the "camera board" convertor are mounted on opposite sides of the PCB.
This is very straightforward:
- Turn off your Raspberry Pi
- Connect the opposite-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards
And you're done!
Shipped BEFORE 20-07-2013
You can recognise this version by the way the connectors one the "camera board" convertor are mounted on the same side of the PCB.
This is very straightforward:
- Turn off your Raspberry Pi
- Connect the same-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards
And you're done!