Difference between revisions of "Rtc"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
Load the I2C and RTC drivers as root: |
Load the I2C and RTC drivers as root: |
||
sudo -s |
|||
modprobe i2c-dev |
modprobe i2c-dev |
||
modprobe i2c:mcp7941x |
modprobe i2c:mcp7941x |
||
echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-0/device/new_device |
echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-0/device/new_device # For rev1 RPi |
||
echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-1/device/new_device |
echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-1/device/new_device # For rev2 RPi |
||
To write the system time to the RTC (you might need to run this command twice, when you use the RTC for the first time): |
To write the system time to the RTC (you might need to run this command twice, when you use the RTC for the first time): |
||
Revision as of 09:17, 7 October 2013
Load the I2C and RTC drivers as root:
sudo -s modprobe i2c-dev modprobe i2c:mcp7941x echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-0/device/new_device # For rev1 RPi echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-1/device/new_device # For rev2 RPi
To write the system time to the RTC (you might need to run this command twice, when you use the RTC for the first time):
hwclock -w
Read out the RTC, and print the date and time to your console:
hwclock
Read out the RTC, and adjust system time:
hwclock -s
To automatically do this on startup, add the following lines to /etc/rc.d/rc.local
modprobe i2c-dev modprobe i2c:mcp7941x echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-0/device/new_device // For rev1 RPi echo mcp7941x 0x6f > /sys/class/i2c-dev/i2c-1/device/new_device // For rev2 RPi hwclock -s