Difference between revisions of "FT240X"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[File:FT240X.jpg|thumb|300px]] |
[[File:FT240X.jpg|thumb|300px]] |
||
This is the documentation page for the FT240X breakout board. |
This is the documentation page for the FT240X breakout board. That can be bought in the [http://www.bitwizard.nl/shop/breakout-boards/ft240x-breakout-board BitWizard shop]. |
||
== overview == |
== overview == |
||
Revision as of 12:26, 2 November 2015
This is the documentation page for the FT240X breakout board. That can be bought in the BitWizard shop.
overview
The FT240X breakout board has an USB connector, one 20-pin IO connector. The brains of the PCB, of course, is an FT240X chip.
External resources
pinout
The 20-pin connector is connected as follows:
| 5V | 3V3 |
| VCCIO(jumpered) | DATA0 |
| DATA1 | DATA2 |
| DATA3 | DATA4 |
| DATA5 | DATA6 |
| DATA7 | RXF# |
| TXE# | RD# |
| WR# | SI/WU# |
| CBUS5 | CBUS6 |
| GND | GND |
LEDS
- The only LED is a power LED
Jumper settings
- The only jumper Is for selecting the I/O voltage. 1-2 = 1V8, 2-3 = 3V3.
future hardware enhancements
Changelog
1.1
- Initial public release