Difference between revisions of "Bldc"

Latest revision as of 14:26, 5 September 2016

Flashing

Compared to VESC the BitWizard ESC has a neat feature: no hardware (debugger/programmer) required to perform a firmware upgrade.

To flash new firmware, connect the VESC to the USB port of your computer. Then press-and-hold the button marked "BOOT". Next press-and-release the button next to it, named "RST".

Now your ESC is in firmware-download mode.

To flash the latest firmware use:

 dfu-util -a 0 -D BLDC.dfu

Get/read about dfu-util at:

 http://dfu-util.sourceforge.net/index.html

If you're a windows user use the software at: http://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-stm32080.html

If you are compiling your own firmware: To generate the BLDC.dfu file, use:

 dfuse-pack.py -b 0x8000000:build/BLDC_4_ChibiOS.bin BLDC.dfu

in your firmware source directory.

Difference between revisions of "Bldc"

Latest revision as of 14:26, 5 September 2016

Flashing

Navigation menu

Search

@@ Line 1: / Line 1: @@
+== Flashing ==
+Compared to VESC the BitWizard ESC has a neat feature: no hardware (debugger/programmer) required to perform a firmware upgrade.
+To flash new firmware, connect the VESC to the USB port of your computer. Then press-and-hold the button marked "BOOT". Next press-and-release the button next to it, named "RST".
+Now your ESC is in firmware-download mode.
 To flash the latest firmware use:
@@ Line 7: / Line 16: @@
 If you're a windows user use the software at: http://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-stm32080.html
+If you are compiling your own firmware: To generate the BLDC.dfu file, use:
+  dfuse-pack.py -b 0x8000000:build/BLDC_4_ChibiOS.bin BLDC.dfu
+in your firmware source directory.