FT312D

From BitWizard Wiki
Revision as of 16:47, 16 September 2014 by Tom (talk | contribs) (Created page with "This is the documentation page for the FT312D breakout board. == overview == The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is the documentation page for the FT312D breakout board.

overview

The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.

External resources

pinout

The 12-pin connector is connected as follows:

5V3V3
USB ERROR#(jumpered)TEST0
NCNC
TX_ACTIVECTS#
RTS#RXD
TXDGND

LEDS

  • The only LED is a power LED

Jumper settings

  • The left two jumpers should be placed, the third (right) jumper should NOT be placed.

future hardware enhancements

Changelog

1.1

  • Initial public release
Retrieved from "https://bitwizard.nl/wiki/index.php?title=FT312D&oldid=2951"