FT245RL breakout board
Jump to navigation
Jump to search
FT245RL breakout board
This is the documentation page for the FT245RL breakout board.
overview
The FT245RL breakout board has an USB connector and a 20-pin IO connector. The brains of the PCB, of course, is an FT245RL chip.
pinout
The 20 pin connector is connected as follows
| 1 | GND |
| 2 | GND |
| 3 | D1 |
| 4 | D5 |
| 5 | D2 |
| 6 | D7 |
| 7 | D0 |
| 8 | D4 |
| 9 | D3 |
| 10 | D6 |
| 11 | WR |
| 12 | RD# |
| 13 | RXF |
| 14 | TXE# |
| 15 | NC |
| 16 | NC |
| 17 | NC |
| 18 | NC |
| 19 | VCC |
| 20 | VCC |
- led1 (near the bottom) is connected to VCC
Jumper settings
IO and supply voltage to 20-pin connector
1-2: 3V3
2-3: 5V
future hardware enhancements
Changelog
1.1
- Initial public release