Raspberry Pi camera extension kit

Connecting everything

Shipped after 20-07-2013

You can recognise this version by the way the connectors one the "camera board" convertor are mounted on opposite sides of the PCB.

This is very straightforward:
- Turn off your Raspberry Pi
- Connect the opposite-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards

And you're done!

Shipped BEFORE 20-07-2013

You can recognise this version by the way the connectors one the "camera board" convertor are mounted on the same side of the PCB.

This is very straightforward:
- Turn off your Raspberry Pi
- Connect the same-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards

And you're done!