FT201X
Jump to navigation
Jump to search
This is the documentation page for the FT201X breakout board.
overview
The FT201X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT201X chip.
External resources
pinout
The 12-pin connector is connected as follows:
| 5V | 3V3 |
| SCL | SDA |
| CBUS5 | CBUS4 |
| CBUS3 | CBUS2 |
| CBUS1 | CBUS0 |
| GND | GND |
LEDS
- The only LED is a power LED
Jumper settings
No jumpers this time :)
future hardware enhancements
Changelog
1.1
- Initial public release