7FETs

From BitWizard WIKI
Revision as of 09:07, 9 February 2012 by Rew (talk | contribs) (Overview)

Jump to: navigation, search
The SPI_6FETs PCB
The SPI_6FETs PCB

This is the documentation page for the SPI_6FETs board.

Overview

The board has 7 fets that allow you to pull a pin of a load low. You would normally tie the other end of your load directly to the powersupply.

About 1A per output should be possible. Maximum voltage is 20V.

You will have to provide your own protection circuits if you are going to drive inductive loads (like a motor).

Assembly instructions

Possible Configurations

External resources

Datasheets

Additional software

Related projects

Pinout

LEDs

Jumper settings

Programming

The software

Default operation

Future hardware enhancements

Future software enhancements

Changelog

1.0

  • Initial public release