Difference between revisions of "FT230X"
From BitWizard WIKI
Line 1: | Line 1: | ||
[[File:FT230X.jpg|thumb|300px]] | [[File:FT230X.jpg|thumb|300px]] | ||
− | This is the documentation page for the FT230X breakout board. | + | This is the documentation page for the FT230X breakout board. That can be bought in the [http://www.bitwizard.nl/shop/breakout-boards/ft230x-breakout-board BitWizard shop]. |
== overview == | == overview == |
Revision as of 13:25, 2 November 2015
This is the documentation page for the FT230X breakout board. That can be bought in the BitWizard shop.
Contents
overview
The FT230X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT230X chip.
External resources
pinout
The 12-pin connector is connected as follows:
5V | 3V3 |
RTS# | RXD |
TXD | CTS# |
CBUS3 | CBUS2 |
CBUS1 | CBUS0 |
GND | GND |
LEDS
- The board is equipped with a power-LED, an Rx-LED and a Tx-LED
Jumper settings
No jumpers this time :)
future hardware enhancements
Changelog
1.1
- Initial public release