Difference between revisions of "FT312D"

From BitWizard WIKI
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
[[File:FT312D.jpg|thumb|300px]]
 
[[File:FT312D.jpg|thumb|300px]]
  
This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function). <br> The FT312D breakoutboard you can buy in the [http://www.bitwizard.nl/shop/breakout-boards/ft312d-breakout-board BitWizard shop].
+
This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function). <br> The FT312D breakout board can you buy in the [http://www.bitwizard.nl/shop/breakout-boards/ft312d-breakout-board BitWizard shop].
  
== overview ==
+
== Overview ==
  
 
The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.
 
The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.
Line 12: Line 12:
 
* [http://www.ftdichip.com/Products/ICs/FT312D.html FTDI product page]
 
* [http://www.ftdichip.com/Products/ICs/FT312D.html FTDI product page]
  
== using the board  ==
+
== Using the board  ==
  
 
The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone.
 
The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone.
Line 18: Line 18:
 
This board is compatible with AOA (Android Open Accessory), and for example the PodMode app.
 
This board is compatible with AOA (Android Open Accessory), and for example the PodMode app.
  
== pinout ==
+
== Pinout ==
  
 
The 12-pin connector is connected as follows:
 
The 12-pin connector is connected as follows:
Line 39: Line 39:
 
* The left two jumpers should be placed, the third (right) jumper should NOT be placed.
 
* The left two jumpers should be placed, the third (right) jumper should NOT be placed.
  
== future hardware enhancements ==
+
== Future hardware enhancements ==
  
 
* jumper to be able to disconnect the 5V header pin from the 5V USB pin
 
* jumper to be able to disconnect the 5V header pin from the 5V USB pin

Latest revision as of 16:51, 6 November 2015

FT312D.jpg

This is the documentation page for the FT312D breakout board. (FT 312 D to help people like me find it with the search function).
The FT312D breakout board can you buy in the BitWizard shop.

Overview

The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.

External resources

Using the board

The board can not be powered from your mobile phone, you will need to supply 5V on the 5V header pin. This will also charge your phone.

This board is compatible with AOA (Android Open Accessory), and for example the PodMode app.

Pinout

The 12-pin connector is connected as follows:

5V3V3
USB ERROR#(jumpered)TEST0
NCNC
TX_ACTIVECTS#
RTS#RXD
TXDGND

LEDS

  • The only LED is a power LED

Jumper settings

  • The left two jumpers should be placed, the third (right) jumper should NOT be placed.

Future hardware enhancements

  • jumper to be able to disconnect the 5V header pin from the 5V USB pin

Changelog

1.1

  • Initial public release