FT312D

From BitWizard WIKI
Revision as of 17:31, 16 September 2014 by Tom (talk | contribs)

Jump to: navigation, search
FT312D.jpg

This is the documentation page for the FT312D breakout board.

overview

The FT312D breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT312D chip.

External resources

pinout

The 12-pin connector is connected as follows:

5V3V3
USB ERROR#(jumpered)TEST0
NCNC
TX_ACTIVECTS#
RTS#RXD
TXDGND

LEDS

  • The only LED is a power LED

Jumper settings

  • The left two jumpers should be placed, the third (right) jumper should NOT be placed.

future hardware enhancements

Changelog

1.1

  • Initial public release