Difference between revisions of "FTDI ATmega"

From BitWizard WIKI
Jump to: navigation, search
(Created page with '= FTDI-atmega = This is the documentation page for the FTDI-atmega PCB. == overview == The FTDI-atmega PCB has an USB connector and a 20-pin IO connector. The brains of the P…')
 
Line 6: Line 6:
  
 
The FTDI-atmega PCB has an USB connector and a 20-pin IO connector. The brains of the PCB is an ATmega168 chip.
 
The FTDI-atmega PCB has an USB connector and a 20-pin IO connector. The brains of the PCB is an ATmega168 chip.
 
== programming ==
 
 
This section describes how you get your program into the processor.
 
 
=== Linux ===
 
  
 
== pinout ==
 
== pinout ==
Line 46: Line 40:
 
* led5 is connected to PC4
 
* led5 is connected to PC4
  
 +
== programming ==
 +
 +
This section describes how you get your program into the processor.
 +
 +
=== Linux ===
  
 
=== windows ===
 
=== windows ===

Revision as of 15:18, 21 September 2011

FTDI-atmega

This is the documentation page for the FTDI-atmega PCB.

overview

The FTDI-atmega PCB has an USB connector and a 20-pin IO connector. The brains of the PCB is an ATmega168 chip.

pinout

The 20 pin connector is connected as follows

1GND
2GND
3PC3
4PC2
5PC1
6PC0
7PB5
8PB4
9PB3
10PB2
11PB1
12PB0
13PD7
14PD6
15PD5
16PD4
17PD3
18PD2
19VCC
20VCC
  • led1 is connected to VCC
  • led2 is connected to CBUS0 (FT232RL)
  • led3 is connected to CBUS1 (FT232RL)
  • led4 is connected to PC5
  • led5 is connected to PC4

programming

This section describes how you get your program into the processor.

Linux

windows

writing programs

The chip is an ATmega168. http://www.atmel.com/dyn/resources/prod_documents/doc2545.pdf

future hardware enhancements

future software enhancements