Difference between revisions of "Raspberry Pi camera extension kit"

From BitWizard WIKI
Jump to: navigation, search
(Created page with "Coming soon...")
 
Line 1: Line 1:
Coming soon...
+
= Connecting everything =
 +
 
 +
This is very straightforward:
 +
- Turn off your Raspberry Pi
 +
- Connect the same-side FPC cable to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
 +
- Connect the opposite side FPC cable to the camera module, and the adapter board labeled "Camera board"
 +
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards
 +
 
 +
And you're done!

Revision as of 15:15, 14 June 2013

Connecting everything

This is very straightforward: - Turn off your Raspberry Pi - Connect the same-side FPC cable to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi" - Connect the opposite side FPC cable to the camera module, and the adapter board labeled "Camera board" - Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards

And you're done!