Difference between revisions of "Raspberry Pi camera extension kit"

From BitWizard WIKI
Jump to: navigation, search
(Connecting everything)
Line 1: Line 1:
 
= Connecting everything =
 
= Connecting everything =
  
This is very straightforward:
+
This is very straightforward:<br>
- Turn off your Raspberry Pi
+
- Turn off your Raspberry Pi<br>
- Connect the same-side FPC cable to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
+
- Connect the same-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"<br>
- Connect the opposite side FPC cable to the camera module, and the adapter board labeled "Camera board"
+
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"<br>
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards
+
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards<br>
 
+
<br>
 
And you're done!
 
And you're done!

Revision as of 15:16, 14 June 2013

Connecting everything

This is very straightforward:
- Turn off your Raspberry Pi
- Connect the same-side FPC cable (supplied with the kit) to the CSI connector of your Raspberry Pi, and the adapter board labeled "Raspberry Pi"
- Connect the opposite side FPC cable (supplied with the camera module) to the camera module, and the adapter board labeled "Camera board"
- Connect the IDC cable to both adapter boards. Make sure pin 1 of the cable lines up with de pin 1 markings on both adapter boards

And you're done!