Raspberry Relay

From BitWizard WIKI
Revision as of 15:55, 22 August 2014 by Rijk (talk | contribs) (Overview)

Jump to: navigation, search
The Raspberry Relay board
The Raspberry Relay board


The Raspberry Relay board can be connected to a Raspberry Pi using the 26-pin GPIO connector. The relays can be controlled using the Raspberry Pi GPIO pins. Optionally, the Pi can be powered by the micro USB port on the Relay board. This way, the connectors for power, ethernet and USB are on one side. Please note that the polyfuse will be bypassed if the Pi is powered via the Relay board. The polyfuse prevents damage when a short-circuit occurs.