Difference between revisions of "Solder jumpers"

From BitWizard WIKI
Jump to: navigation, search
(Created page with '== Solder jumpers == Trace still intact Carefully(!!!) cut the naroow trace between the middle and righ…')
 
(Solder jumpers)
Line 2: Line 2:
  
 
[[File:solder_jumper_normal.JPG|none|thumb|300px|alt=Trace still intact|Trace still intact]]
 
[[File:solder_jumper_normal.JPG|none|thumb|300px|alt=Trace still intact|Trace still intact]]
Carefully(!!!) cut the naroow trace between the middle and right pad with a sharp knife:
+
Carefully(!!!) cut the narrow trace between the middle and right pad with a sharp knife:
 
[[File:solder_jumper_cut.JPG|none|thumb|300px|alt=Trace is cut|Trace is cut]]
 
[[File:solder_jumper_cut.JPG|none|thumb|300px|alt=Trace is cut|Trace is cut]]
 
Place a solder jumper over the other two pads:
 
Place a solder jumper over the other two pads:
 
[[File:solder_jumper_soldered.JPG|none|thumb|300px|alt=New connection is created|New connection is created]]
 
[[File:solder_jumper_soldered.JPG|none|thumb|300px|alt=New connection is created|New connection is created]]

Revision as of 17:26, 11 May 2012

Solder jumpers

Trace still intact
Trace still intact

Carefully(!!!) cut the narrow trace between the middle and right pad with a sharp knife:

Trace is cut
Trace is cut

Place a solder jumper over the other two pads:

New connection is created
New connection is created