Difference between revisions of "Solder jumpers"
From BitWizard WIKI
(→Solder jumpers) |
(→Solder jumpers) |
||
Line 4: | Line 4: | ||
Carefully(!!!) cut the narrow trace between the middle and right pad with a sharp knife: | Carefully(!!!) cut the narrow trace between the middle and right pad with a sharp knife: | ||
[[File:solder_jumper_cut.JPG|none|thumb|300px|alt=Trace is cut|Trace is cut]] | [[File:solder_jumper_cut.JPG|none|thumb|300px|alt=Trace is cut|Trace is cut]] | ||
+ | Note that you can now see the bare color of the PCB, a yellowish colour. The green you know from PCBs is the solder mask that is often used. | ||
+ | |||
Place a solder jumper over the other two pads: | Place a solder jumper over the other two pads: | ||
[[File:solder_jumper_soldered.JPG|none|thumb|300px|alt=New connection is created|New connection is created]] | [[File:solder_jumper_soldered.JPG|none|thumb|300px|alt=New connection is created|New connection is created]] |
Latest revision as of 18:06, 4 November 2016
Solder jumpers
Carefully(!!!) cut the narrow trace between the middle and right pad with a sharp knife:
Note that you can now see the bare color of the PCB, a yellowish colour. The green you know from PCBs is the solder mask that is often used.
Place a solder jumper over the other two pads: