BitWizard
I2C Level Shifter
This board shifts the signalling levels of an I2C bus. This enables you to hook up 3V3 I2C slaves to an 5V I2C master, or the other way around. The I..
€2.95
I2C Pull Up
I2C requires a pullup on the bus. "master" devices like the raspberry pi have those integrated on their PCB, but if this is not the case (e.g. arduino..
€1.95
I2C RTC
This board is equipped with an MCP79412 I2C RTC and a backup battery. Perfect for a Raspberry Pi without an internet connection which always needs to ..
€9.95
I2C Splitter/Switch with PCA9548A/TCA9548A
An I2C splitter/mux based on the PCA9548A chip. This chip has one I2C input, and 8 outputs whcih can be connected to or disconnected from the main I2C..
€9.95
IDC Cable, 6 Pin (SPI), 15cm
a 6-pin IDC cable, perfectly fit for connecting our SPI expansion boards, or between your AVR programmer and AVR board, or... Length: 15cm (6"). ..
€1.99
IDC Cable, 6 Pin (SPI), 30cm
a 6-pin IDC cable, perfectly fit for connecting our SPI expansion boards, or between your AVR programmer and AVR board, or... Length: 30cm (12"). ..
€2.19
IDC connector, Male, 20 pin for Breadboard
One 2x10 pin male IDC connector, perfect for connecting cables to a breadboard. ..
€2.49
IO Expander
A breakout board that grants 8 additional digitial IO pins using the MCP23008 (I2C) or MCP23S08 (SPI) chip. Both the SPI and I2C version contain 2 ..
€9.95
LCD I2C/SPI Interface with 16x2 LCD
A 16x2 LCD module with the I2C or SPI interface board attached. This allows you to control the display easily over said bus protocols. The display ..
€13.95
LCD I2C/SPI Interface, with 20x4 LCD
A 20x4 LCD module with the I2C or SPI interface board attached. This allows you to control the display easily over said bus protocols. The display ..
€23.95
LCD I2C/SPI Interface, without LCD
This board is designed to be mounted to the back of an HD44780 compatible LCD, enabling you to control the LCD over an I2C or SPI bus. Most LCD dis..
€9.95
MAG3110 Magnetometer Breakout Board
Breakout board with the MAG3110 3-Axis, digital magnetometer.Arduino example code..
€9.95
MCP9700 Temperature Sensor
An MCP9700 temperature sensor in TO92 casing. Excellent as an external sensor for your Raspberry Pi user interface, or to connect to a SPI/I2C DIO boa..
€0.95
MMA8653 Accelerometer Breakout Board
Breakout board with the MMA8653 3-Axis, 10-bit digital accelerometer.The MMA8653 chips are currently unavailable. Ask us for availability. ..
€9.95
Motor
This board is designed to drive two regular (brushed) DC motors or one (unipolar or bipolar) stepper motor. It is of course also possible to driver ot..
€24.95
MS5637 Pressure Sensor Breakout Board
Breakout board with the MS5637 Pressure Sensor.Arduino example code for this barometer can be found here:https://github.com/freetronics/BaroSensor ..
€9.95
Orange pi DMX 4x
Orange pi DMX interface with 4 universes. Designed and developed in cooperation with Arjan van Vught. Works with Orange pi one. (The ..
€59.95
Raspberry Juice
One of the most prominent missing features of the Raspberry Pi is the ability to completely switch off the power. The only way to turn off your Pi is ..
€12.49
Raspberry Pi A/B MicroSD Adapter
Tired of that SD card stick out from under your Raspberry Pi? This is the solution! A simple convertor board that lets u use a micro-SD card in your ..
€5.95
Raspberry Pi Camera extension kit
This kit is designed to extend the cable of a Raspberry Pi camera. We tested it succesfully with 4m (13ft) of ribbon cable. This kit contains everyth..
€14.95