I2C splitter

From BitWizard Wiki
Revision as of 17:11, 21 March 2014 by Tom (talk | contribs)
Jump to navigation Jump to search

general info

Based on the PCA9548A chip from NXP
http://www.nxp.com/documents/data_sheet/PCA9548A.pdf

I2C address:
1110 000 tru 1110 111 (jumper selectable)

Each I2C output has 4K7 pull-up resistors.

physical dimensions

  • Board outline: 50x25mm
  • Mounting hole diameter: 3mm
  • Mounting hole pitch: 44x19mm (3mm from board edge)

using the board

Retrieved from "https://bitwizard.nl/wiki/index.php?title=I2C_splitter&oldid=2761"