FT220X

From BitWizard Wiki
Revision as of 16:23, 16 September 2014 by Tom (talk | contribs) (Created page with "This is the documentation page for the FT220X breakout board. == overview == The FT220X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is the documentation page for the FT220X breakout board.

overview

The FT220X breakout board has an USB connector, one 12-pin IO connector. The brains of the PCB, of course, is an FT220X chip.

External resources

pinout

The 12-pin connector is connected as follows:

5V3V3
MIOSI2MIOSI3
MIOSI0MIOSI1
CBUS3MISO
CS#CLK
GNDGND

Please note: On version 1.1 of the boards, the silkscreen markings for MIOSI1 and MIOSI3 are switched!

LEDS

  • The only LED is a power LED

Jumper settings

No jumpers this time :)

future hardware enhancements

Changelog

1.1

  • Initial public release
Retrieved from "https://bitwizard.nl/wiki/index.php?title=FT220X&oldid=2941"