BitWizard

Product Compare (0)


 ADC with MCP3424

ADC with MCP3424

This is a small I2C breakout board with the MCP3424 chip from Microchip, providing you with 4 differential ADC channels (which can also be used in sin..

€12.49

16x2 White on blue LCD

16x2 White on blue LCD

A 16 characters by 2 lines LCD module. The module has an industry-standard HD44780-compatible controller, compatible with a lot of standard software l..

€6.39

20x4 White on blue LCD

20x4 White on blue LCD

A 20 characters by 4 lines LCD module. The module has an industry-standard HD44780-compatible controller, compatible with a lot of standard software l..

€14.95

2mm to 2.54mm Adapter, 10 Pin

2mm to 2.54mm Adapter, 10 Pin

A small adapter board to connect an 2.54mm IDC cable to a 2mm header.<br> We needed this for a FriendlyARM development board.Note: When we fill..

€2.95

2mm to 2.54mm Adapter, 20 Pin, Centered

2mm to 2.54mm Adapter, 20 Pin, Centered

A small adapter board to connect an 2.54mm IDC cable to a 2mm header. We needed this for a FriendlyARM development board. ..

€3.49

2mm to 2.54mm Adapter, 20 Pin, Left Aligned

2mm to 2.54mm Adapter, 20 Pin, Left Aligned

A small adapter board to connect an 2.54mm IDC cable to a 2mm header. We needed this for a FriendlyARM development board. ..

€3.49

2mm to 2.54mm Adapter, 20 Pin, Right Aligned

2mm to 2.54mm Adapter, 20 Pin, Right Aligned

A small adapter board to connect an 2.54mm IDC cable to a 2mm header. We needed this for a FriendlyARM development board. ..

€3.49

2mm to 2.54mm Adapter, 30 Pin

2mm to 2.54mm Adapter, 30 Pin

A small adapter board to connect an 2.54mm IDC cable to a 2mm header. We needed this for a FriendlyARM development board. ..

€3.95

2mm to 2.54mm Adapter, 40 Pin, Centered

2mm to 2.54mm Adapter, 40 Pin, Centered

A small adapter board to connect an 2.54mm IDC cable to a 2mm header. We needed this for a FriendlyARM development board. ..

€3.95

3FETs

3FETs

This module enables you to easily control upto 3 high-power loads over an I2C or SPI interface. Possible uses: - Driving high-power LEDs or incand..

€12.49

3°C/W Heatsink

3°C/W Heatsink

This heatsink could replace the heatsink on our Dimmer, to allow currents up to 8A. Dimensions: 41.6x25.63x63.6 ..

€4.95

6FETs

6FETs

This module enables you to easily control up to 6 loads over an I2C or SPI interface, while needing minimal resources from your CPU. It can also drive..

€9.95

7FETs

7FETs

This module enables you to easily control up to 7 loads over an I2C or SPI interface, while needing minimal resources from your CPU. It can also drive..

€9.95

AVR Development board 7.0

AVR Development board 7.0

Development board with atmega328 and FTDI232R chip. Should accept Arduino sketches. Useful led for status and debugging. ftdi status leds (tx, rx) 5V..

€14.95

BigRelay

BigRelay

This module enables you to easily control up to 6 high-voltage loads over an SPI interface, lightbulbs for example, or your coffee maker (mmmmmm, coff..

€19.95

Breadboard Connector, 20 Pin

Breadboard Connector, 20 Pin

Connector that allows connection of a development board with a breadboard. ..

€2.49

Breadboard Connector, 26 Pin

Breadboard Connector, 26 Pin

This board allows you to connect a 26-pin ribbon cable (for instance from your Raspberry Pi) to a breadboard. ..

€2.49

Cable, 4 Pin (I2C), F-F

Cable, 4 Pin (I2C), F-F

A 4-pin cable (female-female), a perfect fit for connecting our I2C expansion boards to our RPi-serial board. Length: 20cm (just under 8") ..

€1.99

Cable, 4 Pin (I2C), F-M

Cable, 4 Pin (I2C), F-M

A 4-pin cable (female-male), a perfect fit for connecting our I2C expansion boards to our RPi-serial board. Length: 40cm (~16") ..

€1.99

Case for raspberry pi with DMX

Case for raspberry pi with DMX

To enclose your raspberry pi B+, raspberry pi2, or raspberry pi 3 with our DMX interface for raspberry pi with USB we have designed a nice a..

€24.95

Custom Order

Custom Order

If we make special order items for you, we can inform you of the cost. You'll be able to order through the shop if you order this item the appropriate..

€1.00

Custom Order - No shipping

Custom Order - No shipping

If we make special order items for you, we can inform you of the cost. You'll be able to order through the shop if you order this item the appropriate..

€1.00

DAC with MCP4726/MCP4822

DAC with MCP4726/MCP4822

A breakout board with the MCP4726 / MCP4822 DAC from Microchip. (the MCP4726 is I2C, the MCP4822 is SPI).  The PCB is equipped with two I2C/SP..

€12.49

DC-DC Step-Down Convertor

DC-DC Step-Down Convertor

A small but powerfull step-down converter, based on the LM2596 chip. Input voltage: 4.5 - 31V Adjustable output voltage: 1.5 - 30V Maximum output..

€4.95

Dimmer

Dimmer

This is a dimmer board suitable for resistive loads of upto 4A (suitable for both 230V and 115V power systems). This includes amongst others lights an..

€19.95

Showing 1 to 25 of 105 (5 Pages)